As an Amazon Associate I earn from qualifying purchases

Friday, October 27, 2023

The Ogre Mark V: A Quick and Easy Paint Guide

In the year 2085, armored warfare is faster and deadlier than ever. Hovercraft, tanks, and infantry slug it out with tactical nukes. But, the most feared weapon of all needs no human guidance. It's a giant cybernetic tank bristling with guns and missiles.

It's the Ogre.


A part of the sturdy, cardboard game board. You can also play without the board and use a ruler.

Ogre has always been one of my favorite games and one of the first games I purchased myself as a you 12 something. The updated board game version is fantastic and Honorable Son #3 (The Chemical Engineer Aviator) has plastic miniatures to play on the new board game. He asked me if I would paint them (it didn't take long to twist my arm) so I thought I would use just three GW Contrast paints to knock them out quickly.


Above is the sprue for the MK V Ogre in hard plastic. In order to use GW Contrast paints the items must be primed in either white or a light gray. I did not use Hobby Primers, even though they are usually the best quality primer out there - I just buy whatever is on sale.


You can see that some of the red can still be seen after one coat of primer. I almost gave it a second coat but I thought to my self, "Self, this is an Ogre. It's not some fancy parade ground museum piece. It needs to look rough around the edges." In addition, I was painting it white so I figured - who cares?


I did some rushing in gluing the Ogre together with the treads. I should have glued one side, let it dry, and then glue the other side. You can see the results of where my sticky fingers were as I put treads back into the correct positions. Hey, it's battle damage. The model itself is easy to put together if you take your time.




I used GW Contrast Blood Angel Red for the base color of the hull. Truth in advertising time: I did not paint the whole hull at one time due to the length of the model. Contrast paints take about 20 minutes to dry and I did not want my finger prints (see above on gluing treads!) on any of the areas. The main batteries, in fact all of the batteries are painted with Contrast Basilicanum (What the heck is a Basilicanum in the GW world? Gee, another homework assignment.) Black and the Primary Sensor Array is painted with Contrast Nazdreg (BWAH HAH HAH!) Yellow.





The engine like structures, exhaust fans, and treads were all painted with GW Contrast Black.




The rest of the secondary batteries, anti-personnel batteries and secondary sensor arrays were also all painted Contrast Basilicanum Black. The Rattler Missiles were painted with Contrast Nazdreg Yellow.


Tah Dah! All done.






4 comments:

  1. Very nice - I would not mess around with a red OGRE even if it was on my own side...

    ReplyDelete
  2. Thanks Neil for the how to guide! Especially the bit about not leaving finger prints!

    ReplyDelete
    Replies
    1. Your welcome! In the future there will be posts on Heavy Tanks, GEV's etc.

      Delete